References & Bibliography

Abbs, A.F. & Needham, A.D. (1985), Grouted Piles in Weak Carbonate Rocks, Offshore Technology Conference, Conference Paper, OTC 4852, Offshore Technology Conference.

Alm, T. & Hamre, L., (1998), Soil Model for Driveability Predictions, Offshore Technology Conference, OTC 8835, pp. 13.

Alm, T. & Hamre L., (2001), Soil model for driveability predictions based on CPT interpretations, Proceedings of the International Conference on Soil Mechanics and Geotechnical Engineering, Balkeema, CONF 15; VOL 2, pp. 1297-1302.

API (1993), Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms - Load and Resistance Factor Design, American Petroleum Institute, Standard, pp. 285.

API (2000), Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms - Working Stress Design, American Petroleum Institute, Standard.

API (2006), Bulletin to API (2000) to be published late 2006.

API RP2GEO (2011), API RP2 GEO Geotechnical and Foundation Design Considerations.

Bowles E. (1997), Foundation Analysis and Design, McGraw-Hill, Book, ISBN 0 07 9122477 7.

Carter, M., and S.P. Bentley. (1991), Correlation of soil properties, Pentech Press, London

Clausen, C.J.F., Aas, P.M. & Karlsrud, K. (2005), Bearing Capacity of Driven Piles in Sand, the NGI Approach, Taylor & Francis Group, London, Conference Paper, ISBN 0 415 39063 X, pp. 677-681, Frontiers in Offshore Geotechnics: ISFOG 2005, Editors Gourvenec & Cassidy.

Colliat, J.L., Vergobbi, P., Puech, A., (1993), Friction degradation and set-up effects in hard clays offshore Angola, Offshore Technology Conference, OTC 7192, pp. 627-634.

Dobry, R., Ladd, R.S., Reese, L.C., Ng, T., (1988), Modelling of pore pressures and shear moduli in calcareous soils by strain-controlled cyclic triaxial testing, Proceedings of the International Conference on Calcareous Sediments, Perth

Dunnavant, T.W. & O’Neill, M.W. (1989), Experimental P-Y Model for Submerged Stiff Clay, ASCE, Journal Paper, pp. 95-114, Edition No 1, Vol. 115, Journal of Geotechnical Engineering, Editors .

Dyson, G.J. & Randolph M.F., (1997), Load transfer curves for piles in calcareous sand, 8th International Conference on the Behaviour of Offshore Structures, Delft, The Netherlands, Elsevier Science Ltd, 2, 245-258.

Dyson, G.J. & Randolph M.F. (2001), Monotonic Lateral Loading of Piles in Calcareous Sand, ASCE, Journal Paper, pp. 346-352, Edition No 4, Vol. 127, Journal of Geotechnical and Geoenvironmental Engineering.

Finnie, I. & Morgan, N., (2004), Torsional Loading of Subsea Structures, Paper No. 2004-JSC-346, ISOPE conference - Toulon - (2004),

Focht, J.A., Johnson, G.W. & Rivette, C.A. (1986), Results of Recent Cone Penetrometer Testing in the Gulf of Mexico, Offshore Technology Conference, Conference Paper, OTC 5104, pp. 213-224, Offshore Technology Conference.

Fragio, A.G., Santiago, J.L. & Sutton, V.J.R. (1985), Load Tests on Grouted Piles in Rock, Offshore Technology Conference, Conference Paper, OTC 4851, pp. 93-96, Offshore Technology Conference.

Jardine, R., Chow, F., Overy, R. & Standing, J. (2005), ICP Design Methods for Driven Piles in Sands and Clays, Thomas Telford, Book, ISBN 0 7277 3272 2, pp. 105.

Jeanjean P. (2009), Re-assessment of PY curves for soft clays from centrifuge testing and finite element modelling (OTC 20158), Offshore Technology Conference 4-7 May 2009, Houston TX.

Jeanjean P., Zhang Y., Zakeri A., Gilbert R., Senanayake AIMJ. (2017), A Framework for Monotonic p-y Curves in Clays, Offshore Site Investigations and Geotechnics conference, September 2017, London.

Kallehave, D. & LeBlanc, C. & Liingaard, M.A. (2012), Modification of the API P-Y formulation of initial stiffness of sand, Conference Paper, SUT OSIG, pp. 465-472.

Karlsrud, K., Clausen, C.J.F. & Aas, P.M. (2005), Bearing Capacity of Driven Piles in Clay, the NGI Approach, Conference Paper, ISBN 0 415 39063 X, pp. 775-781, Frontiers in Offshore Geotechnics: ISFOG 2005, Editors Gourvenec & Cassidy.

Kolk, H.J. & van der Velde, E. (1996), A Reliable Method to Determine Friction Capacity of Piles Driven into Clays, Offshore Technology Conference, Conference Paper, OTC 7993, pp. 337-346, Offshore Technology Conference.

Lehane, B.M., Schneider, J.A. & Xu, X. (2005), A Review of Design Methods for Offshore Driven Piles in Siliceous Sand, UWZ, Report, GEO 05358, pp. 105.

Lehane, B.M., Li, Y. & Williams, R. (2013), Shaft Capacity of Displacement Piles in Clay Using the Cone Penetration Test, J. Geotech. Geoenviron. Eng. 2013.139:253-266.

Lehane, B.M., Lim, J.K., Carotenuto, P., Nadim, F., Lacasse, S., Jardine, R., Van Dijk, B., (2017). Characteristics of Unified Databases for Driven Piles, in: OSIG 2017. Presented at the OSIG 2017, Society for Underwater Technology, London, UK, p. 162.

Lehane, B., Liu, Z., Bittar, E., Nadim, F., Lacasse, S., Jardine, R.J., Carotenuto, P., Jeanjean, P., Rattley, M., Gavin, K., Haavik, J., Morgan, N., (2020). A new unified CPT-based axial pile capacity design method for driven piles in sand, in: Proceedings of the 4th International Symposium on Frontiers in Offshore Geotechnics. Presented at the 4th International Symposium on Frontiers in Offshore Geotechnics, American Society of Civil Engineers.

Morgan, N. & Finnie, I., (2006), An Integrated Approach to Offshore Axial Pile Design in Sands and Clays, OMAE Conference, Paper 92130, Hamburg (2006).

Novello, E.A., (1999), From static to cyclic p-y data in calcareous sediments, Engineering for Calcareous Sediments, Proceedings of the 2nd International Conference, pp. 17-27.

Puech, A., Poulet, D. & Boisard, P., (1990), A Procedure to Evaluate Pile Drivability in the Difficult Soil Conditions of the Southern Part of the Gulf of Guinea, Offshore Technology Conference, OTC 6237, pp. 327-334.

Reese, L.C., Cox, W.R., and Koop, F.D., (1975), Field testing and analysis of laterally loaded piles in stiff clay, Offshore Technology Conference, OTC 2312, pp. 671-690.

Reese, L. & Van Impe, W.F. (2001), Single Piles and Pile Groups Under Lateral Loading, A.A. Balkema, Rotterdam, Book, ISBN 90 5809 340 9, pp. 463, Edition Hardback.

Sorensen, S.P.H. & Ibsen, L.B. & Augustesen, A.H. (2010), Effects of diameter on initial stiffness of p-y curves for large-diameter piles in sand, Numerical Methods in Geotechnical Engineering, CRC Press, pp. 907-912.

Stevens, J.B. & Audibert, J.M.E. (1979), Re-examination of PY curve formulations, Offshore Technology Conference, Paper OTC 3402, 397-403.

Stevens, R., Wiltsie, E. & Turton, T., (1982), Evaluating Pile Drivability for Hard Clay, Very Dense Sand and Rock, Offshore Technology Conference, OTC 4205, pp. 465-481.

Williams, A.F., Dunnavant, T.W., Anderson, S., Equid, D.W. & Hyden, A.M. (1988), The Performance and Analysis of Lateral Load Tests on 356mm Dia Piles in Reconsituted Calcareous Sand, Balkema, Conference Paper, ISBN 90 6191 754 9, pp. 271-280, Engineering for Calcareous Sediments, Editors Jewell & Andrews.