Mobilised Axial Capacity

The mobilized axial capacity output is presented in the ‘AxMobCap’ tab. For each pile tip depth, the compression and tension peaks are presented, together with their corresponding displacements. It should be noted that when no intermediate compression peak was found (usually for SAND layers where the TZ curves do not have lower residual skin friction), the Mobilized Capacity Compression corresponds to the ultimate peak compression load and the Displacement at Mobilized Capacity Compression corresponds to the pile top displacement of the last peak location iteration (equal to ‘Final Displacement * D [-]’ * pile diameter).

../_images/image1832329293.jpg

Illustration of Mobilisable Axial Capacity output

../_images/image1527863907.jpg

Illustration of the corresponding displacements for tension and compression peaks